90 機械工程系師資陣容
::: 學校首頁 本系首頁 ENGLISH 網站導覽
::: 招生快訊榮譽榜最新消息系所簡介師資陣容課程規劃校外實習SOP標準作業流程活動花絮下載專區系部落格相關連結
 
*
目前位置:首頁 > 師資陣容 > 專任教師 > 劉國基 Kuo-Chi Liu
師資陣容 專任教師
:::
美工圖片
 
 
:::
劉國基 Kuo-Chi Liu照片
姓名 劉國基 Kuo-Chi Liu
職稱 特聘教授
電話 (06)5979566 ext. 5839
傳真 (06)5977510
信箱 kcliu@mail.feu.edu.tw
兼任職務
專任教師/
機械一德導師
學歷
◆國立成功大學機械系 博士 1999.9〜2002.11
◆國立台灣大學農工所機械組 碩士 1983.9〜1985.6
◆國立中興大學農機系 學士 1979.9〜1983.6
經歷
  • 南榮工專機械工程科講師
  • 羽田汽車廠機械工程專員
  • 台鹽公司機械工程師
  • 空軍航空技術學院飛機工程系兼任教授
  • 全國機電整合職類乙、丙級技術士檢定監評委員
  • 全國氣壓職類乙、丙級技術士檢定監評委員。
  • 氣壓職類乙、丙級技術士檢定命題委員。
  • 冷凍空調技師
  • SCI期刊The Scientific World Journal編輯
研究領域
近期研究發展方向:
◆生物熱傳分析
◆非傅立葉逆向熱傳分析
◆熱電轉換應用
◆節能技術
著作及研究成果
期刊論文(2009.1~2014.3):
  1. Kuo-Chi Liu* and Han-Taw Chen, 2009, “Analysis for the dual-phase-lag bio-heat transfer during magnetic hyperthermia treatment,” International Journal of Heat and Mass Transfer Vol. 9, pp. 962-967. (SCI)
  2. Po-Jen Cheng and Kuo-Chi Liu*, 2009, “Numerical Analysis of Bio-Heat Transfer in a Spherical Tissue,” Journal of Applied Sciences Vol. 9, pp. 962-967. (NSC 97-2212-E-269 -023) (EI)
  3. Chin-Tse Lin and Kuo-Chi Liu*, 2009, “Estimation for the heating effect of magnetic nanoparticles in perfused tissues,” International Communications in Heat and Mass Transfer Vol. 36, pp. 241-244. (NSC 97-2221-E-269 -023) (SCI)
  4. Po-Jen Cheng*, Kuo-Chi Liu, and Chieh Kung, 2009, "Surface tension effect on nonlinear waves in a thin micropolar liquid film flow down along a vertical cylinder,“ Journal of Advanced Engineering, Vol. 4, No. 1, pp.33-42. (NSC 92-2212-E-269-002)
  5. Po-Jen Cheng* and Kuo-Chi Liu, 2009, “Hydromagnetic instability of a power-law liquid film flowing down a vertical cylinder using numerical approximation approach techniques,” Applied Mathematical Modelling Vol. 33, pp. 1904-1914. (NSC 95-2221-E-269-027) (SCI)
  6. Kuo-Chi Liu* and Chien-Nan Lin, 2010, “Temperature prediction for tumor hyperthermia with the behavior of thermal of thermal wave,” Numerical Heat Transfer, Part A: Applications, Vol. 58, issue 10, pp. 819-833. (SCI) (NSC 98-2221-E-269-018)
  7. Kuo-Chi Liu* and Chin-Tse Lin, 2010, “Solution of an inverse heat conduction problem in bi-layer spherical tissue,” Numerical Heat Transfer, Part A: Applications, Vol. 58, issue 10, pp. 802-818. (SCI) (NSC 97-2212-E-269 -023)
  8. Kuo-Chi Liu* and Han-Taw Chen, 2010, “Investigation for the dual phase lag behavior of bio-heat transfer,” International Journal of Thermal Sciences Vol. 49, pp. 1338-1146. (SCI) (NSC 97-2212-E-269 -023)
  9. Kuo-Chi Liu*, 2011, “Nonlinear behavior of thermal lagging in concentric living tissues with Gaussian distribution source,” International Journal of Heat and Mass Transfer, Vol. 54, pp. 2829-2836. (SCI) (NSC 98-2221-E-269-018)
  10. Kuo-Chi Liu*, Po-Jen Cheng, and Yan-Nan Wang, 2011, “Analysis of non-Fourier thermal behaviour for multi-layer skin model,” Thermal Science, Vol. 15, Suppl. 1, pp. S61-S67. (SCI) (NSC 98-2221-E-269-018)
  11. Po-Jen Cheng*, Kuo-Chi Liu, and David T. W. Lin, 2011, “Hydromagnetic stability analysis of a film coating flow down a rotating vertical cylinder,” Journal of Mechanics Vol. 27, pp. 27-36. (SCI) (NSC 98-2221-E-269-017)
  12. M. S. Suen, J. C. Hsieh, Kuo-Chi Liu, David T. W. Lin 2011, “Optimal design of the electrothermal v-beam microactuator based on GA for stress concentration analysis,” Lecture Notes in Engineering and Computer Science, Vol. 2189, pp. 1264-1268.
  13. Po-Jen Cheng, Chien-Nan Lin and Kuo-Chi Liu, 2012, “Nonlinear surface waves of the thin gravity-driven liquid film flows under magnetohydrodynamic field and rotating centrifugal force,” Journal of the Chinese Society of Mechanical Engineers, Vol. 33, pp. 29-37. (SCI) (NSC 98-2221-E-269-017)
  14. Kuo-Chi Liu*, Po-Jen Cheng, and David T.W. Lin, 2012, “Effects of the thermal lag ratio on the behavior of bio-heat transfer,” Advanced Science Letters, Vol. 9, pp. 925-929. (NSC 99-2221-E-269-010)
  15. Chien-Nan Lin, Jau-Min Su, and Kuo-Chi Liu, 2012,“Study of heat transfer enhancement for water heater,” Advanced Science Letters, Vol. 9, pp. 626-630.
  16. Yuen-Shin Chen and Kuo-Chi Liu, “Analysis of bio-heat transfer using the equation from the DPL model,” Journal of the Chinese Society of Mechanical Engineers, Vol. 33, pp. 133-140. (SCIE)
  17. Cheng, Po-Jen* and Kuo-Chi Liu, “Hydrodynamic stability of a layer of viscous gravity-driven power-law fluid flow under rotating centrifugal force,” Journal of the Chinese Institute of Engineers, Vol. 35, No. 6, pp. 755-766. (SCIE) (NSC 98-2221-E-269-017)
  18. Kuo-Chi Liu, Yao-Nan Wang, and Yuen-Shin Chen, 2012, “Investigation on the bio-heat transfer with the dual-phase-lag effect,” International Journal of Thermal Sciences, Vol. 58, pp. 29-35. (SCI) (NSC 100-2221-E-269-015)
  19. Kuo-Chi Liu*, Cheng-Chi Wang, and Po-Jen Cheng, 2013, “Nonlinear behavior of thermal lagging in laser-irradiated layered tissue,” Advances in Mechanical Engineering, ID 732575 pp. 1-6. (SCI) (NSC-100-2221-E-269-015 & NSC-101-2221-E-269-006)
  20. Kuo-Chi Liu*, Cheng-Chi Wang, and Po-Jen Cheng, 2014, “Analysis of non-fourier thermal behavior in layered tissue with pulse train heating,” Applied Mechanics and Materials, Vol. 479-480, pp. 496–500. (EI)
  21. Cheng-Chi Wang, Po-Jen Cheng, and Kuo-Chi Liu, 2014,“Stress distribution analysis of different types of blade for a fermentation system ,”Applied Mechanics and Materials, Vol. 479-480, pp. 319–323. (EI)
  22. Po-Jen Cheng, Kuo-Chi Liu, and Cheng-Chi Wang, 2014, “Nonlinear evolution of the travelling waves in roll coating flows of thin viscoelastic polymer falling films,” Applied Mechanics and Materials, Vol. 479-480, pp. 45–49. (EI)
  23. Kuo-Chi Liu, Po-Jen Cheng, and Jiun-Shen Wang, 2014, “Analysis of thermal damage in a laser-irradiated based on the non-fourier model,” IACSIT International Journal of Engineering and Technology, Vol. 6, No. 2 pp. 132-136. (EI) (NSC 100-2221-E-269-015)
  24. Kuo-Chi Liu*, Jung-Chang Wang, 2014, “Analysis of thermal damage to laser irradiated tissue based on the dual-phase-lag model,” International Journal of Heat and Mass Transfer, Vol. 70 pp.621–628. (SCI) (NSC-100-2221-E-269-015)
  25. Po-Jen Cheng, Kuo-Chi Liu, and Cheng-Chi Wang,  “Power-series solution to nonlinear hydrodynamic stability of a thin viscoelastic fluid film flow down a rotating vertical cylinder,” Materials Research Innovations, in press. (SCI) (NSC 99-2221-E-269-009-MY2 & NSC 101-2221-E-269-007)
  26. Cheng-Chi Wang, Po-Jen Cheng, and Kuo-Chi Liu, “Flow and stress field analysis of different fluids and blades for fermentation process,” Advances in Mechanical Engineering, in press. (SCI)  (NSC-98-2622-E-269 -004 -CC3 & NSC 100-2628-E-269-016-MY2)
研討會論文(2009.1~2014.3)
  1. Kuo-Chi Liu, Yuen-Shin Chen and Jen-Chieh Li, 2009, “Analysis of the non-fourier bio-heat transfer problem,” International Conference on Mechatronic System of Integration and Application, 4-5 Dec, 2009, Tainan, Taiwan. (NSC 97-2221-E-269 -023)
  2. Kuo-Chi Liu and Yan-Nan Wang, 2009, “Study for non‐fourier thermal behavior in tissue” The 7th Pacific Symposium on Flow Visualization and Image Processing, Nov 16th-19th, Kaohsiung, Taiwan. (NSC 97-2221-E-269 -023)
  3. Cho-Yu Yang, Kuo-Chi Liu, I-Peng Chu, David T.W. Lin, and Chin-Hsiang Cheng, 2009, “The temperature optimization of high power LED array,” Paper No. ASCHT09-C93, Proceedings of ASCHT09 2nd Asian Symposium on Computational Heat Transfer and Fluid Flow, October 20-23, Jeju, Korea. (NSC 98-2221-E-269 -018)
  4. I-Peng Chu, Kuo-Chi Liu, and Po-Jen Cheng, 2009, “Hydrodynamic stability analysis of thin electrically-conductive fluid film flowing down rotating vertical cylinder in a magnetic field”, Paper number: A02-004, Proceedings of the 26th National Conference on Mechanical Engineering, Tainan.
  5. C.Y. Liu, David. T.W. Lin and K.C. Liu, 2009, “The analysis of the thermal structure conjugated problem of the percutaneous laser disc decompression,” 20th International Symposium on Transport Phenomena (ISTP20), Victoria, British Columbia, Canada, July 7-10. (NSC 97-2221-E-269 -023)
  6. 林欽澤、鄭博仁和劉國基,2009,”生物熱傳遞的非傅立葉效應探討”, 第二十六屆機械工程研討會,台南,熱流,A01-034。(NSC 97-2221-E-269 -023)
  7. Kuo-Chi Liu, Po-Jen Cheng, and Yan-Nan Wang, 2010, “Analysis of non-Fourier thermal behaviour for multi-layer skin model,” The 3rd International Symposium on Nonlinear Dynamics, Shanghai, China, Paper number: He-085, pp. 1-6. (NSC 99-2221-E-269-010)
  8. Chin-Tse Lin, Kuo-Chi Liu, 2010, “Analysis of thermal response in a tissue based on thermal wave model,” 2010 International Symposium on computer, Communication, Control and Automation, Tainan, Taiwan, Vol. 2, pp. 25-28. (EI) (NSC 97-2221-E-269-023)
  9. Po-Jen Cheng, Kuo-Chi Liu, and Chien-Nan Lin, 2010, “Magnetohydrodynamic field on nonlinear waves of a thin electrically conducting micropolar liquid film flow down a vertical column,” 2010 International Symposium on computer, Communication, Control and Automation, Tainan, Taiwan, Vol. 2, pp. 21-24. (EI) (NSC 98-2221-E-269-017)
  10. Kuo-Chi Liu, Po-Jen Cheng and I-Peng Chu, 2010, “Analysis of bio-heat transfer with the micro-structural effect”, Paper number: AA01-020, Proceedings of the 27th National Conference on Mechanical Engineering, Taipei. (NSC 98-2221-E-269-018)
  11. 劉國基、陳遠新和林田葳,2010,”腫瘤磁熱治療的溫度反應分析”, 中華民國力學學會第三十四屆全國力學會議,雲林,熱流,論文編號:I1008。(NSC 98-2221-E-269-018)
  12. M. S. Suen, J. C. Hsieh, K. C. Liu, and David T. W. Lin, 2011, “Optimal design of the electrothermal V-beam microactuator based on GA for stress concentration analysis,” Proceedings of the International MultiConference of Engineers and Computer Scientists 2011, March 16 – 18, 2011, Hong Kong.
  13. Kuo-Chi Liu and Yuen-Shin Chen, 2011, “Investigation of Bio-Heat Transfer with Micro-Structural Interaction Effect”, Paper number: I1-017, The 35th National Conference on Theoretical and Applied Mechanics, November 18-19, 2011, Tainan. (NSC 100-2221-E-269-015)
  14. 劉國基、鄭博仁和朱弋鵬,2011,” 生物材料熱傳遞行為的逆向探討”, 第二十八屆機械工程研討會,台中,熱流,A01-022。(NSC 99-2221-E-269-010)
  15. 鄭博仁、劉國基、朱弋鵬,2011,”滾筒塗裝黏彈性液膜之液動穩定性分析,”中國機械工程學會第二十八屆學術研討會,台中,論文編號:A02-001,pp. 1-6。(NSC- 99-2221-E-269-009-MY2)
  16. Liu, Kuo-Chi, Cheng, Po-Jen, and Chu, I-Peng, 2012, “Thermal behavior in layered tissue with continued pulse heating,” The 29th National Conference on Mechanical Engineering, Kaohsiung, Taiwan, Paper number: 1286, pp. 1-6. (NSC-100-2221-E-269-015)
  17. 鄭博仁、劉國基、朱弋鵬,2012,” 聚合物滾筒塗裝非線性液膜表面波效能分析,”中國機械工程學會第二十九屆學術研討會,高雄,論文編號:1584,pp. 1-6。(NSC- 99-2221-E-269-009-MY2)
  18. Po-Jen Cheng and Kuo-Chi Liu, 2012, “Linear surface waves in roll coating flows of thin viscoelastic polymer liquid films using power-series approximation approach techniques,” 2012 International Symposium on Computer, Consumer and Control, Taichung, Taiwan. (EI)
  19.  Ching-Chang Cho, Yu-Lin Chang, and Kuo-Chi Liu, 2012, “Numerical investigation into mixed electroosmotic flow and pressure-driven flow in microchannels with wavy surface,” 6th European Congress on Computational Methods in Applied Sciences and Engineering, September 10-14, 2012,Vienna, Austria. NSC 100-2221-E-269-015
  20. 劉國基*、陳沐鍇(2013, Dec). 熱電轉換驅動自冷卻裝置的實驗研究, 中國機械工程學會第三十屆全國學術研討會, 宜蘭. NSC 101-2221-E-269-006.
  21. Kuo-Chi Liu and Yuen-Shin Chen (2013, Dec). Analysis of Thermal Damage with the Non-Fourier Effect. 中國機械工程學會第三十屆全國學術研討會, 宜蘭. NSC 100-2221-E-269-015.
  22. Cheng-Chi Wang, Po-Jen Cheng, and Kuo-Chi Liu (2013, Oct). Stress distribution analysis of different types of blade for a fermentation system. 2013 International Applied Science and Precision Engineering Conference, Nantou,Taiwan. NSC 98-2622-E-269-004-CC3.
  23. Kuo-Chi Liu, Cheng-Chi Wang, and Po-Jen Cheng (2013, Oct). Analysis of non-Fourier thermal behavior in layered tissue with pulse train heating. 2013 International Applied Science and Precision Engineering Conference, Nantou, Taiwan. NSC 100-2221-E-269-015.
  24. Po-Jen Cheng, Kuo-Chi Liu, and Cheng-Chi Wang (2013, Oct). Nonlinear evolution of the travelling waves in roll coating flows of thin viscoelastic polymer falling films. 2013 International Applied Science and Precision Engineering Conference, Nantou, Taiwan. NSC 99-2221-E-269-009-MY2. (EI).
 
研究計畫(2009.1~2014.3):
計 畫 名 稱 計畫內擔任之工作 起迄年月 補助或委託機構
球形熱源生物熱傳遞過程之非傅立葉效應的逆算探討與分析 (NSC-97-2212-E-269-023) 主持人 2008/08/01-
2009/07/31
國科會
空間變動熱源對腫瘤加熱治療的熱效應分析(NSC 98-2221-E-269-018) 主持人 2009/08/01-
2010/07/31
國科會
非均質材料之雙相延遲熱傳導行為的探討與研究(NSC 99-2221-E-269 -010-) 主持人 2010/08/01-
2011/07/31
國科會
流體傳送與工程應用就業學程計畫 主持人 2010/08/01-
2011/07/31
教育部
以非線性雙相延遲模式探討複層介質受脈衝加熱的熱反應(NSC 100-2221-E-269 -015-) 主持人 2011/08/01-
2012/10/31
國科會
液壓攻牙動力系統之裝配規劃與散熱設計(PS101130736) 主持人 2012/05/01-
2013/10/31
金屬工業研究中心
熱電自冷卻裝置的開發(NSC101-2221-E-269-006) 主持人 2012/08/01-
2013/07/31
國科會
切削液儲槽之節能淨化冷卻技術的研發(NSC 101-2622-E-269 -022-CC3) 主持人 2012/11/01-
2013/10/31
國科會
見華實業
 
 
專利:
1.書畫烘乾收藏裝置
2.螺帽加工結構
3.太陽能熱電系統
4.具自驅動加壓裝置之燃料電池

專業證照:
1.冷凍空調技師高考
2.冷凍空調修護乙級技術士
3.數值控制車床乙級技術士
4.氣壓乙級技術士
5.熱處理乙級技術士
6.word2010專業證照
7.Excel2010專業證照
 
教師個人網站
教師個人網站
0
 
 
   
 
本網站已通過機器檢測無障礙a+等級

Copyright(C)遠東科技大學機械工程系
地址:台南市新市區中華路49號    │   電話:886-597-9566 ext.7511、7512 傳真:06-5977510  │   Email:me_master@mail.feu.edu.tw

瀏覽人次:0009077